coarse industrial mill/ crusher/ pulverizer/ grinding machine

Being a vertical rolling mill, the column mill adopts a grinding principle of continuous and repeated rolling of material bed under medium speed and medium pressure, which is characterized by simple and reliable structure and extremely low failure rate.

1) Compared with other pulverizer under the same power conditions, the output of this machine is increased by 20-30%.



2) All the mineral materials with Mohs hardness below 9.3 can be crushed.



3) The finished powder has a wide range of particle size from the maximum particle diameter of 0.613mm (30 mesh) to the finest diameter of 0.013mm (1000 mesh), while the normal particle diameter is around 0.033mm (425 mesh).



4) Its dust-removing effect exactly meets the National Dust Discharge Standard.



5) The classfier is easy for adjustment.



6) The grinding unit adopts a superposition multi-grade sealing with good sealing performance.

1.ISO9001:2000

2.Capacity:1.5-3.5T/H

3.low cost,low noise

4.Long service time

High pressure suspension grinder mill is used to grind barite, limestione, ceramics, etc, such non-inflammable and non-explosive stuff,which the hardness is below 9.3 Mohs and moisture is less than 6% in the trades of mining,metallurgy,chemical engineering and construction material.The fineness size is adjusttable in the range of 60-1250 mesh(It can even reach to 2500 mesh).It is possible to produce 10-60 mesh powder through assembling special device in the machine.